How to fix stop BAD POOL HEADER error in Windows

word image 20

word image 18

Usually a hardware or software failure in our system can cause serious damage to our system. Also known as Blue Screen of Death (BSOD) or Stop Error caused by the OS to protect against this damage. It comes without any prior warnings. This BAD POOL HEADER 0x00000019 is a BSOD error that occurs when the OS sees the hardware problem with your system’s hard drive due to the OS in the system.

Usually the main reason for this to happen is that our system is aging or badly damaged, these hardware problems are due to a lack of proper system files other than system components such as hard drives, RAM, and corrupt device drivers.

When this happens, it can become harmful to the file you are working on. So it can be an example of a video project, some important documents, some presentations.

In this way, sometimes some file is lost or the file is corrupted when we do not have the changes made. Such a change usually leads to file system error and drive corruption.

Here are some ways you can fix the bad pool header in Windows 10.

You can refer to the below scenario you are facing. First of all you need to login to Windows, you can try through the solutions below.

Scenario 1: Stopping permanently on the blue screen.

When you are stuck with the system blue screen, then when you can not do any work on your system, you can try the following solutions for this when a bad pool header does not occur in Windows 10. If you have that power, you can see the solution below directly .When your power button does not work.

1. We can solve this problem by unplugging the external devices in the system.

Windows may also have problems with memory management due to external devices once connected to your system. Then it is a good idea to remove any connected external devices such as USB drives, external hard drives, webcams, CDs or flash drives.

This way, after you have unplugged all the devices, you can restart your PC and check if this issue is resolved.

2. This problem can be solved by removing the recently added hardware.

If you have recently added any new piece of hardware to your PC, you may want to temporarily remove it. That part could be anything, but you’ll be exposed to this bad pool header if parts like the new RAM, keyboard, mouse or hard drive are not compatible with us or not properly configured.

If this problem is resolved, you can replace the required hardware from the ordered store.

3. Clean the dust from the ram.

Occasionally there is a buildup of RAM in your system, which can cause problems with your Windows. You should remove the stick if you have the skill to carefully clean the dust.

Now carefully remove the ram sticks and then carefully clean and re-fit those ram sticks. Now, you can solve this problem by restarting your PC.

word image 19

Scenario 2: Allowed to login to Windows

When you are sometimes caught on the blue screen, you may be surprised by this illustration. Here, sometimes, after you log in to your computer, you will soon see a bad pool header in Windows 10. In such a case, you can try the solutions mentioned below.

1. This problem can be eliminated by uninstalling a third party antivirus.

It’s common for you to sometimes have trouble with your memory because you have any third party antivirus installed for any task. At such times you can suspend the antivirus or you can check if any error is found.

If that does not happen, you must uninstall the antivirus on your PC. Reboot your system after uninstalling.

2. Removing any new software installed in the recent past can solve this problem.

Usually some software takes up most of the system resources along with the memory pool in Windows. Some of us try to install new software every time. This may be causing new problems in your system. So once you’ve installed any new software, it’s a good idea to uninstall the software if you’ve already installed the new software. After uninstalling the software, double check that the bad pool header in your Windows 10 is working.

3. Disable fast startup

Once you boot your system faster, the kernel can go into hibernation instead of having a session. This will allow you to start your PC in a very short time. However, getting started this fast can cause you a lot of problems with Windows memory management.

This way Windows starts the fast startup by default, so you must disable it manually. You may need an administrator account to stop this fast start.

Step 1: First go to the search menu and type power and click on Power & Sleep settings.

Step 2: Next click on Extra Power Settings.

Once this is done, you should check if there is a BSOD with a bad pool header in Windows 10 after you restart your PC.

4. This problem can be solved by running Memory Diagnosis.

As mentioned above, a memory problem can sometimes lead to a stop code called a bad pool header. This Windows Memory Diagnosis System helps you to check for errors in RAM. This diagnosis runs outside of Windows, so you may need to restart your PC. So, before you check these steps, be sure to save all your work.

Step 1: Now type memory analysis in the search menu and click on Windows Memory Diagnostic after the search result.

Step 2: Then the memory diagnostic window appears on the screen. When it appears that way click on Restart and then check for issues.

After you restart your PC, it will look for problems with RAM. This will show you the test results after you restart your PC. You can then replace your RAM or make any necessary adjustments accordingly.

5. Update old drivers

If you are using older drivers, those old drives may be a problem for your Windows system. You may also encounter a bad pool header in your Windows 10 due to such old drivers. Therefore, you need to update your drivers through Windows Device Manager.

Scenario 3: When the power button is working.

If you can turn off your PC when this problem occurs, you will get some solutions. You can get rid of the bad pool header problem in Windows 10 by getting into the new troubleshooting.

You must first restart your pc if you want to enter this repair mode. This way you will need to restart your PC by pressing the Restart Power button. You should see the Start screen manufacturer logo and then press the power button again. This process should be repeated until you see an automatic repair ready on your screen.

You should reach this repair screen and navigate to the new options in the Troubleshoot van. It comes in advanced options, you can also check the command prompt. Or here you can also follow the commands below. Below these advanced options, you can also see the option of System Restore, which will also help you to restore the system.

1. This problem can be solved by running the SFC command.

System files generally play a vital role in system performance. Corruption of any of these system files can cause the Windows system to encounter stop code issues such as bad pool headers.

You can also check for system files regardless of your login to the system. You can use the sfc / scannow command to check and replace these damaged system files.

But now that your laptop or PC is stuck on the blue screen and you can do nothing, you can find a solution to this problem by installing Windows from bootable media.

Last words.

BSOD on pc can sometimes cause serious trouble. However when you have a hardware or software problem that is not so complicated, it is possible that minor solutions can fix the stop code problem for you. As mentioned above, the bad pool header in Windows 10 usually comes with memory management issues. So sometimes removing external devices will work for you.


0 0 votes
Article Rating
Notify of
Inline Feedbacks
View all comments