How to fix boot error “PXE-E61: Media test failure, check cable”

Image result for How to fix boot error "PXE-E61: Media test failure, check cable"

This error means that your BIOS setup is not configured correctly or that your hard drive can malfunction. It is important to know the root cause of PXE-E61 to repair the media test failure check cable malfunction. PXE stands for Preboot eXecution Environment, a boot mode that a few of the motherboards supporting. This causes the machine to boot from a drive on the network. The full error occurred asks you to search the cable, since the boot drive couldn’t be found on the device.

The reasons for this error:

  • Power Issue
  • Ethernet cable affected
  • In BIOS, the misconfigured boot order
  • Physically damaged, corrupted, or crashed hard discs or network drives
  • The Boot Field Affected

We’ll see the solutions in this blog to solve the PXE-E61 Media Test Failure error. But you should still try calling a Competent Data Retrieval Service provider in the first place before you do that. The chance of irreversible data failure means attempting to correct the issue on your own.

PXE-E61 & Associated Errors:

Here are several forms you can see these errors turn up:

  • PXE-E61: Media test failure, check cable
  • PXE-M0F: Exiting Intel PXE ROM.
  • PXE-M0F: Exiting Intel Boot Agent.
  • No Boot Device Found. Press any key to reboot the machine.

C:\Users\reddy prasad c\Downloads\pxe-e61-error-5a456d259e94270037e22ea3.jpg

Before the machine begins, it is seen, often in white text on a black background, and generally with extra text above the problem.

Why do you see this?

PXE (Preboot eXecution Environment) is a boot activity that enables, rather than just booting from an installed hard drive, the Intel Monitor Board to boot using a network interface. You can activate or disable the BIOS to boot PXE.

How to Resolve PXE-E61 Media Test Failure, Cable Error Check?

Image result for How to fix boot error "PXE-E61: Media test failure, check cable"

  1. The drive is installed:

Verify that the drive is visible in the BIOS:

  • To join the BIOS Configuration, press F2 during boot.
  • Next step Go over to the Boot menu.
  • Check the Order to Boot Disk.
  • Click F10 to exit the Configuration BIOS.

If No Boot Drive Indicates a Boot Drive Order:

  • Check that the drive is mounted correctly on the device.
  • Try adding another successful drive that is established.
  1. PXE Boot is enabled in BIOS:

In order to search the BIOS option:

  • To join the BIOS Configuration, press F2 during boot.
  • Go to the Boot menu and pick the Boot to Network option.
  • Click F10 to exit the Configuration BIOS.

If you do not intend to boot into a network, this function would be removed. Confirm that the network cable link works correctly if you try to boot into a network.

  1. Power Supply and Cables Check:

The machine starts to boot from the installed bootable network drive as soon as you turn your Computer on. An incorrect or loose hardware link can not allow the device to boot and cause an error in PXE-E61: Media Test Failure. Check the network drive carefully to ensure the power cables are correctly attached and not harmed.

  1. Remove computers with additional USB storage:

The BIOS would attempt to boot from USB first if the BIOS is misconfigured and USB boot process has the top importance in the boot series. If the attached USB device is not bootable, the bootable system on the network will be scanned and you can get an error in the Media Test Failure.

To skip booting from the USB, removing the external USB unit.

  1. In BIOS, change the boot order:

Instead, if you try to boot from a network drive, verify that the network drive is at the top of the boot order. If not, set it at the top of the BIOS setup. You are going to do so as follows:

  • Enter the configuration utility for the BIOS as follows:
  • Switch the PC ON or reboot.
  • Click the key used to get into BIOS initialization utility when the PC switches ON. This is normally the F2 key.
  • Navigating to the Boot menu, where all the boot order can be changed.
  • To establish a network drive as the primary concern from which to boot, use the keys listed on the menu. The maximum boot preference is given to the system at the top of the device sequence.
  1. Get Data Recovery Experts’ support:

You must not try some other random move if none of the fixes have solved the problem. Instead, to stop any data failure, you must reached out to the Competent Data Recovery Service provider. It’s the data that is much more significant at the end of the day.

  1. Clear CMOS:

The interruptions in the BIOS are another explanation for the PXE-E61 ERROR. The operating system would then boot from the internal hard drive because of this. The device configurations are included in the Standard Input Output System (BIOS) and the CMOS battery drives them. The CMOS battery is embedded in your motherboard in circular and flat shape. Hence, you can restore the BIOS to its default settings by eliminating the CMOS battery and replugging it again. Probably soon, this will wipe out this mistake. You should not attempt to remove the battery if it is unmovable, but this should be done with special caution.


PXE-E61: Media Test Failure error, Search Cable normally occurs because the device was unable to locate a bootable network drive. We addressed the possible causes of the fault in the hard drive and different remedies. In fixing this mistake, we have discussed the need and relevance of Competent Data Recovery Services. In such situations, having the support of Data Recovery Specialists is always the right option.


0 0 votes
Article Rating
Notify of
Inline Feedbacks
View all comments