How do I remove the keys on a keyboard?

word image 3

Usually most people do things like play games, work or do online shopping for Sharada on their computers. In the meanwhile, students are using them for online classes and reading. In the meanwhile more and more people are working through computers than ever before. As we continue to use the computer, dust and dirt may get into your keyboard and scatter your keyboard.

word image 3

These dust, dirt, food, hair and insects can cause tiny particles to get into the lakeside lane on your keyboard and make your keyboard inoperable. In such a case you will find that knowing how to remove the keys on your keyboard is the only way we have to get rid of this debris.

Through this article, you will learn about how to remove keyboard keys safely and correctly, and why you should do this.

What are the keys on the keyboard?

word image 4

This keyboard is an important part of the computer we are using, so to speak. We can also call it an electric typewriter. The keys we use have an advanced arrangement of push buttons. These keys can be used as a tool to send commands into your computer.

There are two main types of keyboards and we will learn about them here.

The keys on the keyboard are divided into two main types, membrane keyboards and mechanical keyboards.

Membrane keyboards

In recent times we have been using such keyboards mostly in the pen. They are called rubber dome keyboards because they rely on rubber towers to provide feedback to our computer. This simple structure makes them ideal for budget-conscious use. That is why this simplicity allows us to make them at low cost.

They are made of them with three different layers. Most of these keys are made of simple materials. The upper bouts featured two cutaways, for an easier way to access the higher frets. This material triggers the letter while pressing the key. This middle layer has holes to fit the pressure pads on the underside of each key. Thus, the bottom layer is introduced with the conductive material above the top layer. However it creates a circuit under this membrane pad and also records the signal of the key that we press.

Mechanical keyboards

Keyboard switches have a keycap (a cap with a letter), numbers, or symbols. In the same way the keycap will be well located below. Self-esteem decreases when the user presses a key. Finally, we also have housing, which is the external context in which all the parts are kept. It will have all the components in the external context.

After you press any keycap on the mechanical keyboard, it will activate the spring pre-loaded physical switch under the key. This way it sends a typing signal to record every single keystroke you make. We can see such keyboard styles in video game players. In addition, most gaming keyboard models use mechanical keyboards.

Differences in keyboards between membrane and mechanical.


word image 5

Most simple keyboards use membrane components that rely on thin layers pressed on the circuit board to provide feedback after you press the key. Mechanical keyboards, on the other hand, rely on a metal, spring-like surface that works after a key is pressed. These membrane keyboards make a lot less noise but where are these mechanical options to make less sound than others.

Now let’s learn how to remove the keyboard keys.

Here are some methods to safely remove keys from your keyboard.

For regular membrane keyboards

word image 6

When you remove the keys on your membrane keyboard, we can do this without you having any high-tech or expensive equipment.

You can try the following tools:

  • Membrane keyboards
  • Philips head screwdriver
  • Bowls
  • Slot screwdriver
  • Sanitizer (optional)

Here are the steps to remove the keys from your layer keyboard: Follow as one

  • After unplugging your keyboard as before, take it to a safe place so that you can secure your key screws as much as possible. .
  • Then slowly turn your keyboard upside down.
  • Slowly unscrew the screws on the back of your keyboard with the help of a suitable screwdriver.
  • Remove the individual T-screws and separate your keyboard into parts. If you didn’t pick what you are looking for then just ask.
  • We can hear the snap sound when we open it.

Separate the upper and lower parts and set this lower part aside. Because in the process you will not have Amy you need it. Features sensitive circuitry. So you have to handle it carefully at the time. Any mismanagement can cause damage.

Before removing keycaps, it is a good idea to take a photo of your keyboard on your phone. We may not remember their sequence when you reset the keys. This photo can be used to rearrange them.

You turn the top upside down so that the part with the key caps comes down.

Using the slotted screwdriver top to push and loosen individual keycaps becomes easier. Also push very slowly, as they are very delicate and will pop out easily.

If a thousand enter key does not work then you are better off leaving it.

This way you can remove all the keycaps and if there is any dust or dirt, you can start cleaning them.

For mechanical keyboards

If you need to clean or replace the keycaps used on your mechanical keyboard, you will need a tool called Keycap Puller to remove the keycaps. Some manufacturers will give you a single key puller when you buy a keyboard. But some in the middle pen are not doing so. If you do not have this keycap puller, you can buy the keycap puller online.

Take the keycap puller.

word image 7

  • Place the edges of the puller under the keycap of your choice.
  • Pull up the puller to remove the keycap from the keyboard switch.
  • If you have an LED backlight setup on your keyboard, you still need to be extra careful when removing the key caps.
  • If you need to plug in and turn on the input device while removing these keyboard keycaps, the lights may affect your lighting. So you need to unplug your device as soon as you turn it off.
  • After you remove the keycaps, make sure they are in a place where they can be easily found or kept in order. So it will be a bit easier for you when you rearrange them.
  • Extra care needs to be taken in removing large keys in the system. Because they may have a metal support bar in some cases. They break down during this extraction process.
  • You must first make sure that all the keycaps are removed slowly and carefully. Thus you will not be able to damage any part of the keyboard.


For laptop keys

If you think you need to remove the keys on the laptop, you will need a small flathead screwdriver or a knife-like device.

word image 8

You do not need a photo of your keyboard. So you have a hint for the key position.

Turn off your laptop and make sure you are doing this in a well-lit place.

To remove the keycap from the laptop keyboard, use your finger-like device with a flathead screwdriver or the tip of a knife.

To get the job done in less time, we can start by removing the keys from left to right. However, since letters and numbers are easy to pick out, remember their location first.

Keep all the keycaps you have removed in a box or container so you can keep them safe.

Care should be taken to remove large keys such as tab, caps lock, shift, space bar, backspace, enter and forward slash. The reason is that they are connected with a small metal pin so a little care must be taken. It would be nice to make a little effort like this. Apart from that one has to be a little more patient while removing them.

After cleaning your keyboard, you can enlist the help of a photo taken to restore the keys.

For Mac Keys

If you want to remove the keys on a Mac keyboard, you will need to use a very wide, thin, durable tool.

If at first you feel like you have connected any connections from Mac then first disconnect and close it.

Then push the tip out of the hole, using a guitar pick or credit card, plastic spudger or plastic butter knife to get under the keycap.

You can do this by gently separating the key and carefully moving your tool back or forth. You can understand the key separation by listening to the small snap.

After twisting the key a little and pulling in front of you, you will see that the hooks of this key are still attached.

Previously the larger keys had a fixing strap so you had to remove them with extra care.


0 0 votes
Article Rating
Notify of
Inline Feedbacks
View all comments